Home/Glossary/Custom ASIC Solutions
Semiconductor knowledge

Custom ASIC Solutions

A combination of custom chip design, licensed IP and production services tailored to an application. The solution may include digital, analog and mixed-signal functions rather than a single fixed type of ASIC.

← All glossary termsTechnical guide · 5 min read
In this article

A combination of custom chip design, licensed IP and production services tailored to an application. The solution may include digital, analog and mixed-signal functions rather than a single fixed type of ASIC.

An example system-on-chip organization
Conceptual functional blocks; the boundaries and connections are chosen for the application.

Customization should serve the product

A custom ASIC solution integrates hardware functions selected for a particular application. The benefit may come from lower energy, a smaller board, a specific interface combination, improved latency or a more controlled product lifecycle. Begin by identifying which product constraint cannot be met well enough with available standard components. Customization has engineering and manufacturing costs, so its value should be tied to a measurable system outcome. A unique chip is not automatically a better solution if it adds complexity without improving the product's important characteristics.

Choose what belongs on the chip

Integration decisions affect flexibility and risk. A function implemented in fixed logic can be efficient but difficult to change. A processor or programmable datapath can preserve flexibility at an area, power or software cost. Analog functions can reduce external components while creating process and noise constraints. Evaluate the complete system boundary, including memories, power management, package connections and software. The most useful architecture is often selective: customize the stable, valuable functions while retaining appropriate flexibility for uncertain requirements and future product changes.

Compare against credible alternatives

Build a reference using a plausible FPGA, processor, standard IC combination or existing product architecture. Compare complete costs and operating scenarios rather than an ASIC's projected core power with another solution's entire board power. Include non-recurring engineering, masks, IP, packaging and validation. Consider how expected volume changes the economics and how a specification revision affects the plan. The comparison should expose the assumptions that make custom silicon attractive and the conditions under which a different approach would be preferable.

Make the solution supportable

A custom design also needs boot software, test access, diagnostics, production data and lifecycle ownership. Decide who maintains firmware and who can approve hardware changes. Plan observability so field or manufacturing failures can be investigated. If a customer relies on a proprietary interface or algorithm, define its ownership and integration boundary clearly. A supportable solution is more than a working first sample: it includes the information and processes needed to reproduce, test, update where possible and sustain the product throughout its intended service life.

Questions about customization

Is an ASIC justified only by very high production volume?

Volume matters, but it is not the only factor. Power, integration, performance, form factor and lifecycle requirements can also influence the decision. The business case should make those benefits explicit.

Must a custom solution implement every function on one die?

No. Some functions may remain in external components or software when that produces a better balance of cost, flexibility, technical risk and system performance.

Build a representative workload model

Begin with the work the product must perform rather than an isolated block specification. Identify data sources, rates, burst behavior, dependencies and required outputs. Include operating cases that are infrequent but consequential, such as startup or recovery after an error. A model can be simple if it answers a clear question about capacity, buffering or latency. Record its limitations and update it as the architecture becomes more concrete. The goal is to identify which resources and assumptions control the product outcome before detailed implementation makes those choices expensive to revisit.

Partition function and responsibility

Decide which work belongs in fixed logic, programmable hardware, software or external components. Each boundary introduces interfaces and ownership. Describe data formats, control sequences and the handling of partial completion or failure. Avoid optimizing one block while leaving the cost of moving data or synchronizing with another block unaccounted for. A coherent partition also helps assign engineering responsibility: the designer of a function and the integrator of the complete system should agree on what the interface guarantees and which conditions the surrounding system must provide.

Compare complete alternatives

Use equivalent workloads, output quality and operating conditions when comparing architectures. Include memories, interfaces, software and relevant package or board effects. A favorable core-only estimate can become less attractive after the complete system is considered. Keep non-recurring effort and production cost visible when the choice changes the manufacturing route. Explore a small number of credible scenarios instead of presenting one precise result built on uncertain inputs. Explain which assumption changes the recommendation, so the team knows where another measurement or supplier confirmation would be valuable.

Preserve the path to a usable product

Architecture includes observability, configuration and lifecycle decisions as well as normal computation. Define how the device starts, how software discovers its capabilities and how faults are reported. Plan the debug and test access needed during development and production, with appropriate controls for deployment. Keep future flexibility tied to plausible product changes rather than an undefined promise of supporting everything. Review these choices with the people responsible for implementation, software and product engineering. Their feedback can reveal constraints that a block diagram alone does not show and can prevent an efficient-looking architecture from becoming difficult to verify, manufacture or support.

A practical cross-discipline review

Before committing the next stage, bring the design, verification and product-engineering owners together around the same revision. Confirm the assumptions that pass between them: operating modes, interfaces, test access and the evidence expected at release. List unresolved issues with a responsible owner and a concrete way to close them. An open question is easier to manage when its consequence is understood than when it is hidden inside a general progress estimate. Preserve the decision record so a later change can be evaluated against the original reasoning. This review is useful even for a narrow specialist task, because the surrounding product still determines whether the delivered result is usable.

Include the receiving team's acceptance question in the review: what must be demonstrated before this result can be used safely in the next engineering stage? Agree how that demonstration will be recorded and how a subsequent change triggers a focused reassessment of the affected evidence.

Explore the related Avnet offering or discuss your project requirements.

Let's talk about your next project.

Explore design, technology enablement and manufacturing with Avnet ASIC Solutions.

Contact our team →