Home/Glossary/Low-Power ASIC Design
Semiconductor knowledge

Low-Power ASIC Design

ASIC design aimed at reducing energy use or power consumption while meeting functional and performance requirements. Techniques include clock gating, suitable architectures, voltage choices and controlled power domains.

← All glossary termsTechnical guide · 5 min read
In this article

ASIC design aimed at reducing energy use or power consumption while meeting functional and performance requirements. Techniques include clock gating, suitable architectures, voltage choices and controlled power domains.

Physical implementation checkpoints
Conceptual checkpoints. Implementation is iterative, and release checks must describe the same revision.

Use an operating-state model

Low-power ASIC design begins with how the product spends its time. Active processing, idle periods, sleep, wake-up and communication can contribute differently to energy use. A low active-power number may be less important than fast wake-up or reduced standby leakage in an intermittently used device. Define workloads and state transitions before choosing techniques. The goal is useful work within the product's energy and thermal constraints, not the smallest power figure measured under an unrepresentative condition.

Reduce unnecessary activity

Architecture can avoid work and data movement that the application does not need. Local data reuse, suitable precision, efficient memory access and appropriate parallelism can all influence energy. Clock gating can reduce switching where it is correctly applied, while power gating can reduce leakage in inactive regions with additional sequencing and state-management requirements. Each technique changes the verification problem. A block must resume with the intended state and must not expose invalid signals to active logic while it is powered down or transitioning.

Power intent and implementation

Power domains, isolation, retention and level shifting need a consistent description and implementation. The relevant power intent should agree with the RTL, physical design and verification environment. Supply distribution and package behavior affect whether circuits receive usable voltage during real activity. Timing analysis must account for the intended operating states and conditions. A power optimization that creates unreliable transitions or unverified reset behavior is not a successful product improvement. Review functional correctness and energy goals together rather than treating them as separate final checks.

Measure the complete scenario

Power estimates depend on activity data, models and operating assumptions. State those inputs clearly and update them as the design matures. Silicon measurements should identify the workload, voltage, frequency, temperature and measurement boundary. Include transition energy when it matters to duty-cycled operation. Compare alternatives using the same useful output and required quality. A design can consume less instantaneous power while taking longer to finish, so energy per task and response time may provide a more useful view than either metric alone.

Questions about low power

Is lower voltage always safe and beneficial?

Voltage affects timing and operating limits. Use supported conditions and evaluate the complete implementation; reducing voltage outside validated limits can compromise correct operation.

Does power gating automatically save energy?

Its benefit depends on leakage, idle duration, transition overhead and the surrounding design. Evaluate the actual operating cycle and verify sequencing, isolation and state recovery.

Check the technology input package

Confirm that the process, standard-cell libraries, memories, IP views and tool settings belong to a supported combination. Record versions and operating conditions. Physical abstracts, timing models and logical views should describe compatible configurations. Review warnings before accepting them as harmless, especially when they concern missing clocks, unconstrained paths or incomplete library data. A flow can complete successfully while checking an incomplete problem. Establishing trustworthy inputs is therefore part of implementation engineering, not merely a preliminary file-management task that can be assumed correct.

Close interacting constraints together

Timing, routing density, power distribution and electrical limits influence one another. A change that helps one path can increase congestion or current demand elsewhere. Evaluate significant changes using the relevant combined checks rather than selecting the best report from unrelated iterations. Keep the package and external interfaces in view when planning pins, clocks and supplies. Early estimates are useful for exploration, but they should be replaced or qualified as more detailed physical information becomes available. The final decision needs evidence from a coherent released implementation.

Review operating modes and exceptions

A chip can have multiple clock rates, test states, power modes and interface configurations. Decide which combinations require analysis and how the assumptions are represented. Review timing exceptions with the logic and verification owners so they reflect intended behavior rather than a way to hide a difficult path. Power-state transitions also need attention when isolation, retention or level shifting is involved. If a check is intentionally outside scope, document the reason and the responsible approval. This makes the sign-off record understandable to someone who did not participate in every implementation run.

Release a reproducible implementation

Preserve the layout revision, constraints, relevant reports and technology context needed to understand the result. Confirm that final changes have received an appropriate impact review. The manufacturing handover should use the agreed data format and include the supporting information required by the receiving flow. Identify who can approve tape-out and how a later engineering change will be controlled. A clean tool report is evidence about a defined analysis, not a universal certificate of product success. Productization, characterization and system validation still contribute different evidence after the physical design is released.

Primary reference for further reading

A practical cross-discipline review

Before committing the next stage, bring the design, verification and product-engineering owners together around the same revision. Confirm the assumptions that pass between them: operating modes, interfaces, test access and the evidence expected at release. List unresolved issues with a responsible owner and a concrete way to close them. An open question is easier to manage when its consequence is understood than when it is hidden inside a general progress estimate. Preserve the decision record so a later change can be evaluated against the original reasoning. This review is useful even for a narrow specialist task, because the surrounding product still determines whether the delivered result is usable.

Include the receiving team's acceptance question in the review: what must be demonstrated before this result can be used safely in the next engineering stage? Agree how that demonstration will be recorded and how a subsequent change triggers a focused reassessment of the affected evidence.

Explore the related Avnet offering or discuss your project requirements.

Let's talk about your next project.

Explore design, technology enablement and manufacturing with Avnet ASIC Solutions.

Contact our team →