Home/Glossary/Industrial ASIC Applications
Semiconductor knowledge

Industrial ASIC Applications

Uses of custom chips in industrial equipment, such as sensing, motor control, instrumentation and communications. Product requirements may emphasize lifecycle support, deterministic behavior and operation in defined environmental conditions.

← All glossary termsTechnical guide · 5 min read
In this article

Uses of custom chips in industrial equipment, such as sensing, motor control, instrumentation and communications. Product requirements may emphasize lifecycle support, deterministic behavior and operation in defined environmental conditions.

Connect the ASIC to its product
Conceptual system boundaries. Component evidence contributes to, but does not replace, complete product evaluation.

Start with the machine environment

Industrial ASICs can support sensing, control, communication, power management or specialized processing in equipment. Their requirements often depend on the surrounding machine and service environment. Define input signals, timing constraints, operating temperatures, supply behavior and expected lifetime before selecting an architecture. A controller that functions correctly on a quiet bench may encounter noise, intermittent connections or difficult startup conditions in a real installation. The product specification should describe those scenarios clearly enough for engineers to design and verify the intended response.

Deterministic behavior and diagnostics

Many industrial systems care about predictable timing, not only average speed. Identify which events need bounded response and what happens during overload or communication loss. Buffers, arbitration and software interaction can influence the result. Include diagnostics that help distinguish a sensor problem, interface error or internal fault. Error information should be usable by the machine's control software and maintenance team. A fault counter without a defined interpretation or recovery action provides less value than a smaller set of well-designed, testable status and response mechanisms.

Integration and electrical boundaries

An industrial chip may connect sensitive analog inputs, digital control logic and external communication interfaces. Isolation, voltage compatibility, protection and board-level requirements can shape which functions belong on the ASIC and which remain external. Do not assume that integration eliminates the need for surrounding components. Review power sequencing and unexpected input conditions, including signals present while a supply is off. The complete electrical environment matters to reliable operation, so chip, package and board teams should share the same interface and protection assumptions.

Lifetime and change control

Industrial products can remain in service long after their first production run. Consider process and package availability, software maintenance, test data and the ability to reproduce an authorized design. Discuss how supplier changes and obsolescence will be managed. A second source may require substantial redesign or requalification rather than a simple purchasing change. The development plan should connect technical requirements with the expected production and support period, and avoid promising an arbitrary lifetime that has not been agreed with the relevant suppliers.

Questions about industrial ASICs

Is a high clock rate the main industrial requirement?

Not necessarily. Predictable response, electrical compatibility, diagnostics, energy, lifetime and environmental behavior can be more important than peak processing speed.

Does industrial use automatically require the same qualification as automotive use?

No. Requirements depend on the product, customer and application. Identify the applicable qualification and assurance expectations explicitly rather than inferring them from a broad market label.

Derive chip requirements from system behavior

Begin with the product's intended tasks, users and environment. Describe the signals it receives, decisions it makes and outputs it produces. Include timing, energy and operating limits where they matter. Distinguish requirements that the chip can satisfy directly from those that depend on software, sensors, power supplies or other components. This prevents a good component specification from being mistaken for complete product performance. A useful system review identifies the boundaries and assigns an owner to each assumption that crosses them.

Allocate integration and flexibility

Choose which functions belong in fixed logic, software or external devices. Integration can reduce board complexity and communication overhead, but it also connects the functions' revision and manufacturing lifecycles. Preserve flexibility for plausible product changes without assuming that every requirement can remain open indefinitely. Consider configuration, firmware and interface compatibility alongside area and power. The architecture should explain why each function is integrated and what evidence supports the choice. A custom chip is most useful when it addresses a concrete product constraint rather than simply increasing the amount of circuitry on one die.

Exercise realistic operating cases

Test normal use, startup, interrupted power, invalid inputs and the relevant error or recovery sequences. Use representative workloads and environmental assumptions. Include software-visible behavior so the complete product can detect and respond to important conditions. Measurements should state the setup, configuration and product boundary. A chip-only benchmark can answer a narrow question, but it may not represent what a customer experiences. Preserve reproducible tests and distinguish measured results from estimates while the design and evaluation platform are still evolving.

Plan manufacturing and support

Include package, test access, diagnostics and expected production life in the development plan. Discuss traceability and change control according to the application's actual needs. If qualification or regulatory requirements apply to the finished product, coordinate them with the responsible product team; the presence of an ASIC does not establish compliance. Consider how firmware, supplier changes and field issues will be managed over time. A supportable design connects technical behavior with the information and responsibilities needed to manufacture, evaluate and maintain the product after the first successful demonstration.

A practical cross-discipline review

Before committing the next stage, bring the design, verification and product-engineering owners together around the same revision. Confirm the assumptions that pass between them: operating modes, interfaces, test access and the evidence expected at release. List unresolved issues with a responsible owner and a concrete way to close them. An open question is easier to manage when its consequence is understood than when it is hidden inside a general progress estimate. Preserve the decision record so a later change can be evaluated against the original reasoning. This review is useful even for a narrow specialist task, because the surrounding product still determines whether the delivered result is usable.

Include the receiving team's acceptance question in the review: what must be demonstrated before this result can be used safely in the next engineering stage? Agree how that demonstration will be recorded and how a subsequent change triggers a focused reassessment of the affected evidence.

Explore the related Avnet offering or discuss your project requirements.

Let's talk about your next project.

Explore design, technology enablement and manufacturing with Avnet ASIC Solutions.

Contact our team →